End Mills

Product Details:

These is a double cornered cutting tool is basically used in the automobile and hard industries. Small diameter is giving them more work flexibility in process industries. Both the ends of Double Insert End Mill are offering some ultimate designs. This product is durable and cost effective. Production department is using latest technologies to make the product more popular.

Features:

• Designed by expert professional
• High Reliability
• Durability
• Highly Effective

Product Details:

• This product is basically made from cast iron. It is ultra hard and offering some application including different kinds of hard industries. In general Epoch Deep Evolution is doing designing work; sometime they are initiating to make holes in the metals and hard things. These products are manufactured by using trusted raw materials purchased from reliable vendors. This product is offering high durability and cost effectiveness to our customers.

Features:

• High strength flute shape with high chip removal characteristic
• Stronger R flute helix angle improves cutting performance
• Flute shape with high flute tip
• High Cutting Performance
• Provide improved stability
• New coating with excellent adhesion and wear resistance

Product Details:

Features:

• A heat-resistant coating material with excellent adhesion to the tool substrate was achieved by optimizing the Al content.
• Exhibits high hardness (3000HV) with good wear resistance due to doping of the AlCr coating layer with Si. (TiAlN: 2800HV)
• Exhibits excellent cutting life for cutting materials such as plastic molds, etc. where tool seizure often occurs.
• (2x the cutting life compared to conventional products.) Provides the long life in cutting processing of materials starting with
• HPM-MAGIC and including prehardened steel, carbon steel, alloy steel, SUS, SKD61, SKD11, etc.
• Note) This product obtains less electric conductivity.
• Therefore, Please caution of using electric transmitted measuring systems.

6 flutes specification enables finishing at feed rate of 20m/min:

• High-efficiency machining is possible than conventional ball end mills. Use of outer side cutting edge maximizes
• the tool performance.
• More effective machining is possible by using 5-axis MC

High accuracy and long tool life:

• Employed original cutting edge geometry which tuned 6 edges finely.
• High accuracy machining with long tool life is possible since each edge work uniformly even with micro cutting depth.

High rigidity design:

• Tool rigidity increased as much as possible in order to suppress the deflection of the tool occurred during cutting.
• High precision machining is realized with cutting edge design suitable for finishing.
• Furthermore, abrasion is suppressed by applying PN coating and it improves tool life.

Additional Information:

• Item Code: EPHB-PN
• Pay Mode Terms: T/T (Bank Transfer),Other
• Port of Dispatch: BY HAND

Product Details:

This is a product in which we are offering three different shapes. This is an ultra hard product is basically applicable in the furniture designing industries, automobile industries and some other types of automobile industries. Production department is working on two basic things in the manufacture of Epoch Panacea Ball End Mill Hitachi Make highly designated quality parameters and good quality raw materials. The raw materials we are procuring from well known vendors working with us from a very long time. Beside that our product is durable and long lasting.

Features:

• Special strong geometry
• High heat resistance

Application:

• Die steel
• Composite material
• Carbide alloys

Additional Information:

• Item Code: HGOB-PN

Product Details:

Our organization is involved in offering a wide range of Solid Carbide End Mill Cutter Hitachi Make, which is manufactured from micro fine carbide along with 10 % cobalt. In order to suitably meet the requirements of our clients. The products in this range is credited with such facilities as durability, lasting service life, resistance to corrosion and cost effectiveness. Our range in this category comprises ball nose and end mill cutter

Features:

• Highly effective
• Robust construction
• Manufactured using latest technology
• High reliability

Grade:

• K10 micro-fine
• P30 on request
• TiA ln / TIN Coating - on request

Applications:

• For milling of Cast Iron, Steel, Steel Casting etc, non ferrous material & for universal Material

Product Details:

Turbo End Mill is a kind of mechanical device which is basically known for their high efficiency. These are used in the casting and fitting of metallic devices. In general High Efficient Machining Epoch Turbo Mill is applicable in soft metals and alloys. They are manufactured by the use of certain quality parameters and reliable raw materials. We are assuring effective and timely delivery of product once ordered by our customers. Beside that our products are cost effective and available in different sizes.The design is variable according to the customers need but they are uniform in each case.

Features:

• New flute design suppresses chattering even during deep cutting
• Even though it has 4 flutes, it keeps sufficient chip pockets for high feed rates
• High-strength R-section flute shape
• TH coating provides long tool life
• Abundant dimension variations

Additional Information:

• Item Code: ETM-TH

Product Details:

Micro End Mill is a product name which is basically telling about a kind of product used in the metal industries. The application area includes casting, drilling, designing and making holes in the metals and metallic products. They are manufactured using very high quality raw material sourced from reliable vendors. These products undergo different quality test to ensure superior quality and performance level. These products are known for their dimensional accuracy and efficient design. The drills are available in different sizes and can also be customized according to the requirement of the clients. In the manufacture we are using latest technology and specific dies. We believe in effective and timely delivery of product once ordered by our customers.

Features:

• Dimensional accuracy
• Efficient Design
• Available in various sizes
• Manufactured using latest technology

Additional Information:

• Item Code: EMM-TH-EMD-TH

Product Details:

We offer highly efficient Z Carb End Mill Hitachi Make in different size range. They are made of ultra hard metallic material. We are procuring these raw materials from well known vendors working with us from a long duration of time. In general our products are applicable in steel, ore hardened steel, alloy steel, casting steel and hole making. Beside that our product is accurate enough to offer a uniform result. This product is offering a diameter range of 3 to 12 mm in general.

Features:

• Robust construction
• High reliability
• Corrosion resistance
• Durability

Additional Information:

• Item Code: ZPB

Product Details:

It is a cutting machine is basically applicable in hard tool industries. They are also applicable in automobile and hardware industries. Multi Function End Mill Hitachi Make is generally applicable in the cutting and designing of metallic products. Finest thing of this product is the multi working functions. The size and shape is different for each option and we are representing a long range of products.

Additional Information:

• Item Code: AHJ

Product Details:

The name of this product is telling about the work variation of this product. The variation is being created by the end part. In the manufacture we are either including steel or cast iron as the raw material. Designed dies are making the variations in our product end. We are trying to include more and more demands by the industrial side. Ultra End Mill Hitachi Make is durable and log lasting.

Features:

• Longer life
• Corrosion resistant
• Accurate in dimensions
• HSS and Carbide
• Durable

Additional Information:

• Item Code: AHU

Product Details:

Single Insert End Mill is a mechanical product is telling about its working style. It is with a single mill in the end part. The design has made by the incorporation of latest technologies. High quality raw materials are initiating the efficiency of our product. They are durable and rust free products. Apart from that we are giving a cost effective and time dependent delivery of our product.

Features:

• Durability
• Corrosion resistance
• Highly effective
• Designed by expert quality team

Product Details:

1. Corner-radius end mills have a square nose with slightly rounded corners that help distribute cutting forces evenly to prevent damage to the end mill and extend its life. and high production applications

• Apply coatings for higher feeds, speeds and tool life
• horter end mills with larger diameters
• Variable helix end mills reduce chatter and vibration
• For fast cuts and the greatest rigidity, use shorter end mills with larger diameters
• Variable helix end mills reduce chatter and vibration
• Use cobalt, PM/Plus and carbide on harder materials and high production applications
• Apply coatings for higher feeds, speeds and tool life
• Use cobalt, PM/Plus and carbide on harder materials and high production 
• Apply coatings for higher feeds, speeds and tool life

Product Details:

We offer high quality nose end mills for all kinds of designing industries. Solid Carbide 2 Flute Ball Nose End Mill Hitachi Make is manufactured using very high quality raw materials that are sourced from very reliable vendors. Our product offers uniform helix distance which is defining the work efficiency of the same. These ultra hard products undergo various quality tests to ensure superior quality. These are available in different sizes. Our product is durable and cost effective. The application includes milling and casting industries.

Features:

• Corrosion resistance
• Highly durable
• Robust construction

Grade:

• K10 micro fine
• P30 on request
• TIN Coating - on request

Applications:

• For milling of Cast Iron, Steel, Steel Casting etc, non ferrous material & for universal Material

Product Details:

Owing to a leading manufacturer of mills and cutters we are offering highly applicable Solid Carbide Hi Helix End Mill Hitachi Make to fulfill the needs of all kinds of designing industry. We have been successful to make esteemed clients by offering quality end mill. These are designed and manufactured by the experts using high grade raw material that are procured from reliable sources. Moreover, the products are widely demanded in numerous industries, our product line can be availed by the customers in various sizes and designs as per their needs.

Features:

• Higher rakes with sharp edges to prevent case hardening of the Titanium job
• High helix for easy chip removal
• Variable helix angle for Chatter free machining

Grade:

• K10 micro-fine
• P40 on request
• TiA ln/TIN coating

Applications:

• For high surface milling to achieve good surface finish & higher counter & profile accuracy

Product Details:

With our expertise in this domain, we are able to offer Solid Carbide Roughing End Mill Hitachi Make. Designed and developed by the professionals using high quality raw material and advanced technologies, these are appreciated in the market. Our offered roughing end mills are highly appreciated for their features such as sturdy construction, durable finish standards and high tensile strength.

Features:

• Designed by expert quality team
• High Reliability
• Corrosion Resistance
• Highly Effective

Grade:

• K10 micro fine
• All dimensions in mm
• P40 on request

Applications:

• For heavy stock removal on mild steel, steel alloy and cast iron

Product Details:

Fostered with a team of highly experienced professionals, we are able to manufacture and supply a broad assortment of Solid Carbide Ball Nose End Mill. Our range slotting end mills have been designed after various researches to obtain the dimensions so that it may work efficiently. Further, we can customize these as per the specifications provided by our clients.

Features:

• Manufactured using latest technology
• High Reliability
• Corrosion resistance
• Highly effective

Grade:

• K10 Micro-fine
• P30 on request
• TiA ln / TIN Coating - on request

Applications:

• For milling of Cast Iron, Steel, Steel Casting etc, non ferrous material & for universal Material

Product Details:

This is a finest kind of mechanical device used in the casting and fitting of metallic devices. In general Square Hard End Mill is applicable in the aluminum metal and alloy. In the manufacture we are maintaining highly accurate curvature designs which are giving the product a uniform shape. These ultra hard mills are manufactured by using very high quality raw material that is sourced from trusted vendors. These vendors are associated with us over a very long duration of time. We believe in effective and timely delivery of product once ordered by our customers. Beside that our products are cost effective and available in different sizes.

Features:

• Designed by expert quality team
• Corrosion Resistance
• High Reliability

Specifications:

• Material: Carbide
• Diameter: 1mm, 1.5mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 12mm
• Overall Length: 50-150mm

Additional Information:

• Item Code: HGOSH-TH

Product Details:

Stainless Steel End Mill is a product is basically made from ultra hard metals. The application includes different types of design and making holes in the metallic sheets and products. In general two layers are used in the construction of Stainless Steel End Mill. The outer is giving the color and hardness while the inner layer is offering consistency of this product. Our product is easily affordable and available in different size.

Features:

• Available in different sizes
• High Reliability
• Corrosion Resistance
• Designed by expert professional

Additional Information:

• Item Code: EPSM-EPSW

Product Details:

Trigon enterprise offer ultra Solid Carbide End Mills Hitachi Make with lots of working smoothness and consistency. They are basically applicable for CNC and VNC machines. In the manufacture of Solid Carbide End Mill we are using high specific gravity material to define the hardness ratio. Our product is giving uniform helix difference which is defining their rank. Our products are available in different sizes according to the need of customer. In the manufacture we are using latest technology to define a long shelf life.

 

Features:

• Longer life
• Durable
• Excellent finish

Grade:

• K10 micro-fine
• TiA ln / TIN Coating - on request

 

Applications:

• For milling of Cast Iron, Steel, Steel Casting etc, non ferrous material & for universal Material

Product Details:

Product Details:

Other Details:

• Adopt the design of indexable high-feed cutter to solid end mill. High feed cutting for high hardness steel possible.
• Lineup of ⌀1-⌀12
• The multi flute end mill enables high efficiency machining even in small precision molds.
• Approximate radius makes much thinner chip than real radius
• Vibration-free peripheral clearance geometry
• Newly developed coating "TH3" for hardened steel machining

Product Details:

Square End Mill is a product name which is fundamentally telling about the designing and cutting of metal industries. The application area includes casting, drilling, designing and making holes in soft metals and metallic products. They are manufactured by very consistent raw material sourced from reliable vendors. These products undergo different quality test to define the efficiency level. Our products are known for their accuracy and curvature design. Uniform helix angle is telling about its uniformity.

Features:

• Selectable neck length
• High strength
• Durable
• Fine finish
• High reliability

Additional Information:

• Item Code: EPDBE-PN-ATH

Product Details:

Hitachi Drill Double Margin Hitachi Make is one of the finest version of drilling devices is basically applicable in the designing industries. In general they work on the metals and metallic devices. Hitachi Drill Double Margin is highly efficient as they are offering double performance level. The size and the shape of the product are defined by the customers. Highly specific dies are making our product more efficient and workable. Beside that our product is offering longer shelf life and durability. They are available in affordable price limit.

Features:

• Longer Shelf life
• High Durability
• High Reliability
• Designed by expert professional